kmp_5600c_c01 page 1 of 2 5600 series 10a current sensing transformers www.murata-ps.com www.murata-ps.com/support for full details go to www.murata-ps.com/rohs features ? rohs compliant ? 50, 100, 200 & 300 turn variants ? primary current rating 10a ? 20khz-200khz frequency range ? centre tapped variants available description the 5600 series of current sense transformers are designed to monitor ac currents. they can be used for high frequency current sensing, for example in switched-mode power supplies, motor control and electronic lighting ballasts. selection guide order code number of turns inductance min. dc resistance terminating resistance to produce 1v out /1a in 1turn pins 1&3 pins 1&3, 56050c 50 4.5mh @1v, 50khz 0.133 - 0.199 50 56100c 100 18mh @1v, 50khz 0.93 - 1.40 100 56200c 200 72mh @1v, 10khz 1.87 - 2.81 200 56300c 300 160mh @1v, 10khz 5.73 - 8.59 300 56t100c 100ct 18mh @1v, 50khz 0.93 - 1.40 100 56t200c 200ct 72mh @1v, 10khz 1.87 - 2.81 200 56t300c 300ct 160mh @1v, 10khz 5.73 - 8.59 300 absolute maximum ratings operating free air temperature range -40c to 85c storage temperature range -40c to 125c soldering information 1 peak wave solder temperature 300?c for 10 seconds pin ?nish tin technical notes isolation voltage all 5600 current sense transformers are tested at 500vdc for a minimum of 1 second during our standard test procedure. in addition, as part of our quali?cation process carried out prior to product launch, the 5600 series demonstrated no isolation breakdown at 10kvdc or 6kvac with a bare conductor as the primary winding. whilst this does not imply these parts are designed for environments where such high voltages may be present, it does demonstrate the level of isolation voltage these products are able to withstand. full mains safety isolation can be achieved with appropriately insulated wire on the primary winding. speci?cations typical at t a = 25c 1 for further information, please visit www.murata-ps.com/rohs
kmp_5600c_c01 page 2 of 2 5600 series 10a current sensing transformers murata power solutions, inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. the descriptions contained her ein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. speci?cations are subject to chan ge without notice. ? 2012 murata power solutions, inc. murata power solutions, inc. 11 cabot boulevard, mans?eld, ma 02048-1151 u.s.a. iso 9001 and 14001 registered www.murata-ps.com/support package specifications mechanical dimensions recommended footprint details tube outline dimensions 16.79 (0.661) 8.89 (0.350) 4.06 (0.160) 5.08 (0.200) 6.35 (0.250) 12.70 (0.500) ?5.00 (0.197) ?0.790.05 (0.0310.002) 1.02 (0.040) 12*3 20.19 (0.795) xyyww 56300c package weight: 5.7typ. *pin 2 is ?tted on 56txxxc variants only. arrow designates winding direction referenced to inner core surface. unless otherwise stated, all dimensions in mm (inches) 0.25 (0.010). tube length: 4752 [18.7010.079] unless otherwise stated, all dimensions in mm (inches) 0.25 (0.010). tube quantity: 25 tube material: antistatic coated clear pvc 6.35 (0.250) 12.70 (0.500) 0.10 (0.004) x3 holes ?0.065 (1.65) ?0.059 (1.50) 1 2* 3 unless otherwise stated, all dimensions in mm (inches) 0.25 (0.010). schematic 11.20 (0.441) 2.100.25 (0.0830.010) 7.00 (0.276) 30.00 (1.181) 22.20 (0.874) 0.600.15 (0.0240.006)
|
